Essential Laminate Flooring Tools Every DIYer Needs
Planning to lay laminate flooring yourself? Here is a straightforward checklist of the measuring, cutting, and fitting tools you actually need to get clean cuts, tight joints, and a professional finish without overbuying gear.
2 min read · Updated 2026-11-19
Full disclosure: This guide contains affiliate links. I earn a small commission whenever you buy something through these links!
Planning to lay laminate flooring yourself? Here is a straightforward checklist of the measuring, cutting, and fitting tools you actually need to get clean cuts, tight joints, and a professional finish without overbuying gear.
#Measuring and Marking Tools
Before you cut a single plank, accurate measurements save you from crooked walls and tight doorframes.
- Tape measure and carpenter's pencil: Use a sturdy tape measure to check room dimensions and mark cut lines clearly on the planks.
- Combination square or speed square: Essential for marking crisp 90-degree straight cuts and transferring angles cleanly.
- Contour gauge / scribing tool: Very handy for tracing awkward shapes like curved radiator pipes, door casings, or irregular corners—a laminate scribing and fitting tool makes transferring tricky wall contours quick and accurate.
- Expansion spacers: Small wedges placed between the floor and the wall to keep a consistent expansion gap all the way around the room.
#Cutting Tools for Laminate
The right cutter depends on how much laminate you are laying and how much dust or noise you want to deal with.
- Laminate guillotine cutter: Slices straight across standard laminate planks cleanly with zero sawdust and no power cord—ideal for bedrooms and straight runs.
- Jigsaw: Best for curved cuts, cutouts around pipes, and fitting planks into tight corners where a straight cut will not work.
- Circular saw or miter saw: Great for fast, repeatable straight or angled cuts when doing larger areas, fitted with a fine-tooth laminate or wood blade.
Tip: Always follow the instructions on the cutter when it comes to which side of the laminate should face up during cutting. Test your tools on a small piece of your laminate to see what the cut looks like.
#Fitting and Finishing Tools
Once your cuts are made, these tools help lock the planks together tightly without damaging the click edges.
- Complete laminate installation kit: A tapping block, pull bar, and spacers let you lock planks together snugly along long edges and pull the final row tight near the wall without bruising the tongue or groove. If you already own a rubber mallet, a 30-piece laminate laying set covers the essentials; if you are starting from scratch, a 46-piece laminate laying set with a hammer gives you everything in one box.
- Utility knife: Useful for trimming underlay rolls, scoring thin foam or foil layers, and cleaning up excess packaging or trim.
- Laminate repair kit: Even careful DIYers occasionally nick a plank edge or drop a tool—keeping a laminate floor repair kit on hand lets you blend minor scratches or chips right away.
Once you have your tool kit sorted, map out your room dimensions, cutting waste, and materials in PlankCalc so you know how many packs to pick up before you start.
Ready to plan your own floor? Open PlankCalc free.
Open the planner