All guides

How Much Laminate & Cutting Waste Do You Really Need? (5% vs. 10% vs. 15%)

Not sure whether to add 5%, 10%, or 15% extra when ordering laminate? In this guide, you will learn how to choose the right cutting waste percentage for your room layout, round your total up to whole boxes, and factor in underlay and skirting boards so you buy the exact amount needed in one trip.

4 min read · Updated 2026-11-19

Standing in the hardware store aisle trying to calculate boxes of laminate on your phone is a fast way to make an expensive mistake. If you only buy the exact square meters of your floor, you will run out before you finish the last row. Every room leaves offcuts around walls, doorframes, radiator pipes, and corners.

Adding the right cutting waste allowance means you finish the floor in one weekend without having to drive back to the store (and risk getting a batch with a slightly different color shade). At the same time, it keeps you from buying five extra boxes you cannot return.

#Quick Rule of Thumb: 5%, 10%, or 15%?

  • 5% to 7% (Simple, straight rooms): Best for standard rectangular bedrooms or home offices with few obstacles and planks laid parallel to the longest wall.
  • 10% (Most rooms in a normal house): Best for living rooms, hallways, L-shaped rooms, bay windows, or spaces with doorways, radiators, and alcoves.
  • 15% to 20% (Tricky angles and patterns): Best for diagonal floors (45 degrees), herringbone or chevron patterns, U- or T-shaped layouts, or narrow hallways with lots of cuts.

When in doubt: it's better to have a spare pack of laminate extra, then to come up one pack short.

#How to Calculate Your Laminate Order in 3 Steps

  • Measure Your Net Floor Area: Measure the floor space you actually need to cover. For a standard rectangle, multiply length by width. For L-, U-, or T-shaped rooms, split the floor into separate rectangles, calculate each one, and add them together. Always subtract fixed obstacles like a kitchen island, staircase, or chimneys.
  • Add Your Cutting Waste: Multiply your net floor area by your waste percentage (multiply by 1.05 for 5%, 1.10 for 10%, or 1.15 for 15%). For example, if you have a 24 m2 L-shaped living room and add 10% cutting waste, 24 x 1.10 = 26.4 m2 of total laminate needed.
  • Round Up to Full Boxes: Stores sell laminate by the box, never by the single plank. Check the square meters per box on the label (usually between 1.8 m2 and 2.4 m2) and always round up to the next whole box. Using the example above with boxes covering 2.13 m2, 26.4 divided by 2.13 is 12.39 boxes, so you need 13 boxes total.

Tip: Keep one spare plank or half-box in the attic or garage after you finish. If a heavy tool drops on the floor next year, you will be glad you have an exact match.

#4 Things That Eat Up Extra Planks

Even in a fairly normal room, bump your waste allowance up by 3% to 5% if any of these apply:

  • Minimum stagger rules: Most click-laminate brands require end-joints between rows to sit at least 30 cm (12 inches) apart. If the leftover piece at the end of a row is shorter than 30 cm, you cannot use it to start the next row.
  • Wide or extra-long planks: Big boards look great once they are down, but one bad cut around a doorframe wastes much more material than a standard plank.
  • Matching wood grain: If your laminate has bold knots or tile patterns, you will occasionally trim a board just to avoid putting two identical prints right next to each other.
  • Several small rooms: Three small bedrooms produce more waste than one big open floor of the same size, simply because you have twelve walls to cut against instead of four.

#Do Not Forget Underlay and Skirting Boards

Your shopping list is not complete with just the flooring packs:

  • Underlay / Insulation: Base this on your net floor area (plus around 2% to 5% for seam overlaps), then round up to full rolls or packs.
  • Skirting Boards (Baseboards): Measure the total length of all your walls, subtract the width of every doorway (for example, 3 doors x 0.90 m = 2.70 m deducted), add 5% to 10% for mitered corner cuts, and divide by the length of one board (usually 2.40 m).

#Map Out Your Whole House Before You Buy

You do not need scratch paper or complicated spreadsheets to figure this out. With PlankCalc, you can set up every room in your house (including L-, U-, and T-shapes), pick the cutting waste percentage per room, automatically deduct doorways for skirting boards, and get an exact shopping list rounded to full boxes.

Calculate your flooring and laminate list for free with https://PlankCalc.com

Ready to plan your own floor? Open PlankCalc free.

Open the planner

Also available in: Nederlands